Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Paradise
If your gate is dragging, reversing halfway through its travel, or stuck open, we can help. Gate Repair Chico handles gate repair in Paradise for homeowners and property managers, and we work on the brand on your operator rather than guessing at it. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. One phone call to (866) 369-2364 starts a free estimate.
Living up here teaches you things about gates that flatland installers miss. We know the ridge, we know the long sloped driveways, and we know what the ground under a post footing is likely to do after a wet winter.
Why Paradise Homeowners Call Gate Repair Chico for Gate Repair
Paradise is a town where nearly every gate you see is newer than the people who built the house it sits behind. Most of the fencing and gating that was here before the Camp Fire is gone. What stands now was installed during the rebuild, and that changes what breaks and why. We approach gate repair with that history in mind, because a gate that’s only a few years old failing on a Paradise ridge lot usually points to ground movement, not decades of wear.
We’re gate-only specialists. We don’t do garage doors, fences, or general handyman work. That focus is why homeowners in Paradise call us when they want someone who can actually diagnose an electric operator instead of recommending a full replacement on the first visit. Our technicians have up to 9 years of experience, and they’re trained to trace a fault from the hinge to the control board before suggesting anything.
We serve Paradise and the surrounding foothill communities, and we know the terrain well enough that a call from the ridge means something different to us than a call from the valley floor. Free estimates, upfront pricing, and a written quote agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Paradise
Sliding Gate Repair in Paradise often comes down to the track, the rack, or the operator, and on rebuilt ridge properties the fault usually starts with the ground. When a slide gate runs on a long paved driveway, the rail carries the weight of the whole leaf, and a footing that shifts even slightly shows up as a gate that grinds, jumps the rack and pinion, or stops short of the opener’s travel limit. A typical sliding gate repair in Paradise runs $180 – $450 for adjustments and hardware, and climbs toward $600 – $1,100 when the track needs re-leveling, the operator needs re-tuning, or a failed control board or sensor has to be replaced. Concrete or footing work is quoted separately once we’ve seen it.
Rack, Track, and Roller Checks
The first thing we do on a slide gate is look at the track and the rack. A rack that jumps teeth or a wheel that climbs the rail usually traces back to a settled post or a shifted rail section, not a worn part. We re-level what’s out of true before swapping hardware, because a new rack screwed to a bad rail fails the same way.
Underground and Surface Operators
Many of the high-end properties around the ridge use underground operators for a clean look. Those systems depend on precise alignment between the gate leaf and the buried mechanism, and new gates settling at a different rate than the rebuilt fence around them can throw that off. We re-true limits and test the safety loop detectors and entrapment protection as part of any service call.
Wrought Iron Gate Repair in Paradise
Wrought Iron Gate Repair in Paradise is where the heavy, ornamental, custom-fabricated work gets our attention, because a heavy metal gate on a sloped ridge lot puts real load on the hinge post. When that post cants, the gate racks, drags, and can start reversing mid-travel on its operator. A typical wrought iron repair here runs $250 – $650 for hinge, latch, and alignment work, and $700 – $1,500 when posts need re-setting, welding, or rust treatment. Fire-resistant metal gates are common after the rebuild, so we pay attention to the coating and the hardware that holds up in dry foothill summers.
Hinge and Post Re-Setting
The hinge post does most of the work and takes most of the blame. When ash-contaminated fill settles unevenly after winter rains, the footing shifts and the whole leaf racks. We level, re-set, or reinforce the hinge post before touching the panel, because repairing the gate without fixing the post is temporary.
Weld and Rust Treatment
Dry summers and winter rain are hard on coatings, and a custom metal gate with a failing finish will rust from the weld seams out. We treat rust, re-weld failed joints, and re-coat so a repaired gate holds up through the next season. Safety edges and photocells get verified before the gate goes back into automatic operation.
Trusted Brands We Service in Paradise
We work on your brand, and we name it. In Paradise we service LiftMaster operators, DoorKing access systems, Elite gate operators, and Mighty Mule residential openers, along with FAAC, BFT, Linear, Viking, and Ghost Controls from our wider service lineup. Being brand-agnostic means we aren’t tied to one manufacturer’s ecosystem, so we’re not going to push you toward replacing a working operator just because it’s a competitor’s. We diagnose first. We don’t keep parts on hand or stock inventory, but we know the systems well enough to identify the fault, confirm the part, and schedule the fix with a written price you agree to beforehand.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Paradise Homes
- Settled hinge posts on ash-contaminated soil. The ground under posts on rebuilt burn-scar lots was often fill that settles unevenly, tilting the hinge post and racking a heavy gate. It shows up as dragging, reversing, or a gate that won’t close flush.
- Operators drifting out of alignment on rebuilt properties. The gate, the rebuilt fence, and the driveway all settle at different rates, and an underground or surface operator that was true when installed can beat up the rack and pinion within a season or two.
- Safety photocells and loop detectors knocked out of spec. When a post heaves on a sloped, long-driveway property, the sensors mounted to it move too, and entrapment protection that once worked can stop sensing correctly.
- Rust and weld failures on fire-resistant metal gates. Standard metal gates common to the rebuild hold up well in summer but need coating maintenance to survive foothill winters. A failed weld or a rusting seam is far cheaper to repair than a gate to replace.
Pricing for Gate Repair in Paradise, CA
A typical gate repair in Paradise runs $180 – $450 for adjustments and hardware, and a more involved job with post work, operator re-tuning, or board replacement runs $600 – $1,500. Those are estimates, and the written quote you receive after we look at the gate is the final price. What pushes a job toward the higher end here is almost always footing work rather than parts: a hinge post that has to be re-set in ash-contaminated soil, or a slide gate track that has to be re-leveled before the operator will run true. Safety sensor and entrapment protection work is quoted in the same estimate. Estimates are free, so call (866) 369-2364 and we’ll sort out what your gate actually needs before anyone recommends a replacement.
We Also Serve Cities Near Paradise
Paradise sits close to a handful of other foothill and valley communities, and we cover the surrounding area. We take gate calls in Durham, Magalia, Chico, and Oroville, and the terrain on every one of those is a little different. Whether it’s a long driveway on the ridge or a sliding gate on a valley property, our gate repair team can get out and take a look.
Serving Paradise, CA – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Paradise
It’s almost always the hinge post, not the gate. Many rebuilt Paradise properties have posts set in ash-contaminated fill that settles unevenly after winter rains, canting the post and racking the leaf. A qualified technician levels and re-sets or reinforces the hinge post, corrects the sag in the frame, re-trues the operator’s travel limits, and verifies the safety sensors before returning the gate to automatic service. Call (866) 369-2364 for a free estimate.
Yes. Automated gates require working entrapment protection, and inspectors check photocells and safety edges as part of the evaluation. On a sloped ridge lot where posts can heave, sensors that were fine at install can drift out of alignment, so we test them on every service call. Ask your city’s building department about current permit and inspection requirements for your specific gate. Call (866) 369-2364 to schedule a check.
In most cases, yes. A heavy ornamental gate that racks or drags is usually a hinge post or footing problem, not a gate that’s reached the end of its life. Repairing the post and re-truing the gate costs a fraction of a new custom fabrication. We diagnose first and only recommend replacement when the frame itself is compromised. Call (866) 369-2364 for a free estimate.
Rack and pinion jumping usually means the rail or the track has shifted out of level, not that the rack is worn out. On Paradise properties where the gate, the fence, and the driveway have settled at different rates, the rail can go out of true and the pinion climbs the teeth. Re-leveling the track and re-tuning the operator usually fixes it. Call (866) 369-2364 for a free estimate.
Yes, a solar operator like a Ghost Controls or Mighty Mule system can run on a long driveway, but it has to be sized to the gate’s weight and the number of daily cycles. On a heavy custom gate, the panel and battery need to match the load, and the operator’s limits have to be set correctly or the gate will drag and drain the battery. We’ll assess what your gate actually needs. Call (866) 369-2364 for a free estimate.
If your gate is failing on a Paradise ridge lot, don’t assume it needs replacing. Most of what we see up here is fixable once the post and footing are addressed. Call (866) 369-2364 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We agree the price in writing before any work starts.
Written by the team at Gate Repair Chico.