Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Chico Homeowners
A new gate is a big purchase, and most of the trouble we see starts before the first post goes in the ground: the wrong operator for the driveway, a slide track laid on ground that won’t hold it, or an opener sized for a lighter gate than the one that actually arrived. That’s the problem we solve. We’re gate-only specialists, which means your installation is planned by people who work on gates every day, not by a general contractor squeezing it between other jobs.

Our technicians have up to 9 years of experience, and our team is licensed and insured. We give upfront pricing and free estimates, and the price is quoted and agreed before any work starts. Every installation is measured first and scheduled, so you get a written price rather than a guess at the curb. If a gate fails and you need repair rather than a new gate, same-day service is often possible in Chico. Call (866) 369-2364. We answer 24/7.
Automatic Gate Installation
Automatic Gate Installation is the planning and fitting of a full powered gate system: the gate itself, the posts and footing, the operator, the safety devices, and the low-voltage control wiring that ties them together. You need it when you’re replacing a manual gate you’re tired of getting out to open, adding a gated entry to a new driveway, or replacing a system that’s been repaired one part at a time until nothing matches. We handle the whole install in Chico, from measure to final test, and we work with operators from brands like DoorKing and Elite. Typical automatic gate installation in Chico runs $2,800-$8,500 depending on the gate size, the operator, and whether power is already at the post. The written estimate sets the final price.
Sized to the Gate, Not the Carton
The most common installation failure we’re called out to fix is an operator matched to the wrong gate weight and duty cycle. A light residential arm on a heavy ornamental slide gate will bind, overheat, and wear out early. We measure the gate, look at the slope and travel, and match the operator to what it actually has to move.
Safety Devices and the Power Run
An automatic gate needs working safety edges and photo-eye sensors so it reverses rather than closing on a person, a pet, or a vehicle. Those devices have to be wired and tested as part of the install, not added later. We also plan the power supply to the operator post, since running electricity is usually the step homeowners underestimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the complete job from first measurement to the final cycle test, including the gate, the hardware, the operator, and the access control. You need them when your property changes: a new fence line, a driveway, a change of use on a small commercial lot, or a gate that has reached the end of its useful life. We install swing and slide gates, manual and powered, in Chico and the towns around it. A typical residential gate installation in Chico runs $1,800-$6,500, and a full automated system with access control runs $3,500-$9,000. These are estimates only; the written estimate from your free on-site visit sets the final price.
Swing and Slide, One Visit
We install both swing gates and sliding gates, and the choice usually comes down to the space in front of the driveway and the rise of the grade. A swing gate needs clearance to open and a solid hinge post; a slide gate needs a level track run and room to roll. We’ll tell you which fits your property rather than selling whatever’s in the truck.

Access Control Built In
Keypads, remotes, and entry systems get planned at the same time as the operator, so you’re not retrofitting a keypad through a finished post. We work with the common control components that pair with residential and light-commercial operators. If your entry needs a vehicle loop or a phone-entry system, that gets wired and tested alongside the gate.

Electric Gate Installation
Electric Gate Installation is the electrical side of a powered gate: the operator motor, the control board, the low-voltage wiring, the safety sensors, and the disconnecting means for servicing it. You need it when you’re adding power to a manual gate, when the old electric operator has failed and the gate itself is still sound, or when you want the convenience of an entry that opens from the car. We install electric gate systems in Chico across operator types. Typical electric gate installation runs $2,500-$7,500 depending on operator, gate weight, and how far the power has to run. The price is confirmed in writing before we start.
Wiring and the Power Source
Gate operators run on low-voltage control wiring, but the source of power and the way it reaches the post are part of the job. We look at where the circuit comes from, whether it can handle the operator, and whether a disconnect is in place so the gate can be serviced safely. Get an electrician involved where the supply itself needs work; we’ll tell you plainly if that’s the case.
Safety Reversal and Entrapment
An electric gate is heavy, and the safety devices that stop it and reverse it are not optional. Photo eyes at the gate opening and safety edges on the gate leaf are the two standard layers, and both are tested on install. That’s the difference between a working automatic gate and a dangerous one.
Driveway Gate Installation
Driveway Gate Installation is putting a new entrance gate at a residential driveway, sized to the driveway width and the vehicles that use it. You need it when you’re gating a property for privacy, security, keeping kids and pets in, or keeping a dog in, and when you want a real gate rather than a chain across the drive. We install driveway gates in Chico in wood, steel, ornamental metal, and vinyl, with or without automation. Typical driveway gate installation runs $1,500-$6,000 for a manual gate and $3,000-$8,000 for an automated one, depending on width, material, posts, and operator. The written estimate sets the final price.
Getting the Width Right
The first measurement is the clear opening, not the fence line: you want every vehicle, a delivery truck, a trailer, and an ambulance to pass without a scrape. That’s also where a swing gate vs. slide gate decision usually gets made, since a single swing leaf takes up a lot of driveway. We measure twice before anything gets fabricated.
Posts and Footings on Chico Soil
A gate is only as good as its hinge posts. We dig footings sized to the gate weight and the local soil, which in Chico’s valley ground can be sandy or clay-rich depending on the lot. Posts that wobble in the first season are a sign the footing wasn’t done right, and we build to avoid that call-back.
Sliding Gate Installation
Sliding Gate Installation is the fitting of a gate that rolls sideways along a track or cantilever rather than swinging toward the driveway. You need it when you don’t have room for a swing gate, when the grade or driveway slope makes swing impractical, or when you want a longer, heavier gate than a swing leaf would allow. We install sliding gates in Chico with proper track and post footings, rollers, and optional automation. Typical sliding gate installation runs $2,200-$7,000 depending on gate length, material, and whether it’s automated. This is scheduled work, so we measure, order what’s needed, and set a date; the written estimate confirms the price before we start.
Track, Rail, and Rollers
A sliding gate lives or dies by its track. The rail has to sit on a proper footing so it stays true through the seasons, and the rollers and guides need to be rated for the gate’s weight. We set the track so the gate glides rather than scrapes, and we check it through the full travel before calling it done.
Cantilever and V-Track Options
Where a ground track would be a trip hazard or would fill with debris, a cantilever gate hangs from the posts and rolls without a track on the ground. That’s often the better call for a driveway with heavy traffic. We’ll walk you through which option suits your gate and your ground.
Gate Opener Installation
Gate Opener Installation is fitting the motor and control system that turns a manual gate into an automatic one, or replacing a failed opener on a gate that’s still in good shape. You need it when you want to open the gate from the car, when you want keypad or remote access, or when your old opener has stopped working and the gate doesn’t. We install openers in Chico for swing and slide gates, including brands like Ghost Controls and Mighty Mule for residential driveways. Typical gate opener installation runs $900-$3,200 depending on the operator, gate type, and whether the power and safety devices are already there. The free estimate is written up first, and the price is agreed before we start.
Matching the Opener to the Gate
An opener rated for a 400-pound swing gate will struggle on a 900-pound one, and an operator for a slide gate won’t work on a swing unless it’s designed for it. We look at gate weight, travel, duty cycle, and how often the gate opens in a day, then match the operator. The opener should be quieter and longer-lived than the mistake it replaces.

Batteries, Panels, and Remotes
Most residential openers run on a battery or low-voltage supply, and the accessories – solar panels, keypads, remotes, receivers – need to be planned and tested together. We set up the remotes and keypad, pair them, and walk through how to add or remove a remote later. That way you’re not calling us back for a five-minute task.
Gate Fabrication
Gate Fabrication is building a gate to fit an opening, rather than ordering a stock size and hoping it fits. You need it when the drive, entry, or property line isn’t a standard width, when you want a specific look that matches the house or fence, or when a stock gate won’t take the weight of your operator. We fabricate gates for Chico properties in wood, steel, and ornamental metal, sized to your opening and matched to the operator. Typical custom fabrication runs $1,200-$6,500 depending on material, size, and design; a fully fabricated and automated gate is quoted together with the install. Fabrication is scheduled work, and the written estimate sets the final price.
Material and Finish
Wood and steel take very different maintenance and suit different looks. An ornamental metal gate handles a heavier operator and holds its shape; a wood gate can be built to match a fence but needs the right framing to stay true. We’ll talk through what the gate has to do and how much you want to touch it over the years.
Fitting an Awkward Opening
Uneven drives, sloped grades, and angled property lines are normal. A fabricated gate is measured to the actual opening, so it closes flush against the strike post and doesn’t leave a gap at one corner. That’s the advantage of building to the opening rather than fitting a stock gate to it.
Brands We Service
We work on gate equipment from nine named manufacturers, and knowing the differences matters on installation as much as on repair. DoorKing is the name we see on light-commercial and gated-entry systems, and we know the access control components and operator types that come with it. Mighty Mule and Ghost Controls are the residential DIY-friendly openers common on driveways, and we install and adjust those without treating them as a step down. Elite and LiftMaster cover a wide middle of residential and light-commercial work. FAAC, BFT, Linear, and Viking round out the range from swing and slide operators to heavy-duty automation.
Whether a property has one brand on the gate and a different one on the keypad, or everything from a single make, we can diagnose it because we’re not tied to any one manufacturer’s ecosystem. That also means less pressure to replace a system when a repair will do. Whether you have a DoorKing at a commercial lot or a Mighty Mule on a residential driveway, we can help, and we install from scratch if you’re starting over. Check out our gate repair Chico service if you’re not sure whether you need repair or replacement.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate drags on the ground or scrapes the track. A dragging gate puts extra load on the operator and wears the hinges or rollers fast. Left alone, it can bend the gate frame or burn out the opener motor.
- The opener cycles but the gate doesn’t move. This usually points to a failed clutch, a stripped gear, or a control board issue rather than the gate itself. It’s an electric gate diagnosis problem, not a mechanical one.
- The gate won’t close all the way, or reverses on its own. A misaligned photo eye or a failing safety edge will leave the gate open. That’s both a security issue and a safety one.
- The posts wobble when the gate swings. A loose hinge post is usually a footing problem, and it gets worse with every cycle. Catching it early can save the gate.
- You’ve replaced parts and the gate still misbehaves. Repeated fixes that don’t stick often mean the operator and the gate were never matched to begin with. A proper measure is the honest first step.
Our Process, Step by Step
- 1
Free on-site estimate. We come out, measure the opening, look at the grade and the power at the post, and talk through what you want the gate to do. You get a written estimate with the price quoted before any work starts. No surprises on the invoice.
- 2
Plan and order. We confirm the gate, operator, and access control that suit the property, and order what’s not already on hand. Installation work is scheduled, so you know the date before we leave the estimate visit.
- 3
Footings and posts. We dig footings sized to the gate and set the posts true, so the gate has something solid to hang on. On a slide gate, we set the track and rail together so the gate runs flat from day one.
- 4
Gate and operator install. We hang the gate, fit the operator, and wire the control board, safety edges, photo eyes, and any keypad or remote. We don’t call it done until every device is talking to the controller.
- 5
Test and walk-through. We cycle the gate through full travel, test the safety reversal, and show you how to use the remotes and keypad. You’ll know what to check if something stops working.
How Much Does Gate Installation Cost in Chico?
Gate installation in Chico typically runs $1,500-$9,000 depending on the gate, the operator, and the work involved. A typical manual driveway gate runs $1,500-$6,000. A typical automated residential gate with an opener and safety devices runs $3,000-$8,500. A typical sliding gate install runs $2,200-$7,000, and an opener fitted to a gate you already have runs $900-$3,200. These are estimated ranges; the free on-site estimate and the written price set the final number.
What affects the price most is the gate itself: size, weight, and material. Steel and ornamental metal gates cost more to fabricate and to hang than a wood or vinyl gate of the same width. The operator and access control are the second factor: a residential Mighty Mule on a light driveway costs less than a DoorKing system with a keypad and vehicle loop on a light-commercial entry. The third is the site: how far power has to run, whether the grade needs a cantilever or a track, and how much footing work the ground requires.
How to avoid overpaying comes down to one thing: match the gate to the operator and the operator to the gate. An oversize gate and an undersize opener is the most expensive combination we see, because you pay twice, once for the install and again for the fix. Ask for the written estimate with the gate, operator, and safety devices broken out separately, so you can see where the money is going.
A free estimate in Chico includes the on-site measure, a look at the power and the ground, and a written price for the gate, the operator, and the accessories. If we find something that changes the number, we tell you before any work starts. Call (866) 369-2364 for an exact quote.
Our Service Area Near Chico
We install and service gates across the Chico area, including Chico itself, Kelly Ridge, Durham, Paradise, Magalia, Orland, Thermalito, Corning, and Oroville. Installation and measurement visits are scheduled, so we set a time with you based on the drive from your location and the scope of the job. Repair calls get faster response, and same-day service is often possible close to town. Call to check timing for your address.
Serving Chico, CA – Our Local Coverage Area
We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Chico
Gate installation is fitting a new gate and, in most cases, its operator, posts, footings, safety devices, and access control. It covers everything from measuring the opening to the final test. It’s different from gate repair, which fixes what’s already there. We do both, so you don’t need two contractors as your needs change.
Most residential gate installations take one to two days once the gate and operator are on hand. A simple manual swing gate can go in sooner; a custom-fabricated or heavy automated system takes longer, and a slide gate with a new track run takes longer still. We give you a realistic window with the written estimate, and we don’t start until you’ve agreed to the price.
Estimated ranges in Chico are $1,500-$6,000 for a manual driveway gate, $3,000-$8,500 for an automated residential gate, and $2,200-$7,000 for a sliding gate. An opener fitted to an existing gate runs $900-$3,200. The free estimate gives you a written price for your specific gate. Call (866) 369-2364 for an exact quote, and estimates are free.
Yes. We work on Mighty Mule, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Viking equipment, and we install it too. Whether you have a Mighty Mule on a residential driveway or a DoorKing on a commercial lot, we can help. Our technicians have up to 9 years of experience across those brands and aren’t tied to any single manufacturer.
Yes, for gate repair and electric gate repair in the Chico area, same-day service is often possible. Gate installation is scheduled work, so we measure and order, then set a date. For the phone line: We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Our installs carry a workmanship warranty, and operator and gate hardware warranties come from the manufacturer. We’ll go over both with you in writing at the estimate so you know what’s covered and for how long. If something we installed starts misbehaving, call us and we’ll take a look.
Clear the area at the gate opening and along the slide track run, and make sure we can reach the operator post and the power source. If you have the gate or operator on site already, have the boxes and manuals ready. If not, we’ll order what’s needed and schedule the install once it’s in. Call (866) 369-2364 if you’re not sure what to move.
Schedule Your Gate Installation Service in Chico Today
A gate that fits its opening, matches its operator, and clears the driveway safely is worth doing right the first time. We’re gate-only specialists, we install across Chico and the surrounding towns, and we hand you a written price before any work starts. Call (866) 369-2364 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Gate Repair Chico.