Gate Company in Chico - Fast Local Response, Upfront Pricing

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 369-2364

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Chico, CA

If you’re planning a new driveway, side-yard, or alley-access gate in Chico, CA, the job starts with reading the ground. Chico sits on expansive clay that swells through the wet winter and shrinks through the long dry summer, so a gate that’s set like a gate in Sacramento or the coast will bind and drag within a few seasons. We install gates built for that cycle here. We’re a gate-only company: new installation, mechanical repair, and electric and automated system work. Whether it’s a Mighty Mule on a North Chico driveway or a heavy DoorKing slide gate on a commercial lot, we work on the brand you’ve got. Call (866) 369-2364 for a free estimate.

Call (866) 369-2364

Why Chico Homes Are Different

Chico splits into two gate worlds, and they fail in different ways. The historic core – The Avenues, downtown, South Campus – has turn-of-the-20th-century and mid-century bungalows on long, narrow lots, where wood privacy gates and alley-facing garage gates are squeezed between an older fence line and a structure. Move north and east into the post-2000 subdivisions and you’re looking at builder-grade vinyl, ornamental aluminum, and steel gates on shallow-set posts that are now 15 to 20 years old and starting to sag and mis-latch.

The common denominator is ground movement. Chico’s expansive clay plus a long dry season make posts heave and shift, so hinges bind and latches miss on a seasonal rhythm – a gate that swings free in March drags by August. Summer heat over 100°F cooks vinyl and breaks down exterior finishes faster than coastal California manages, and wood gates dry-shrink, split, and warp. Meanwhile the older neighborhoods still carry wrought-iron and chain-link gates from the 1950s through the ’70s, rusting and out of square. That’s why re-setting or sleeving a post often beats adjusting hinges, and why we leave wood gates a little loose in winter: they’ll tighten in the dry heat.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Chico Services

Two jobs bring most Chico homeowners to us: a gate that’s stopped working mechanically, and an electric or automated system that’s failing at the operator or control level.

Gate Repair in Chico

Mechanical gate repair in Chico usually comes down to the same handful of failures: sagging hinges, latches that miss by half an inch, frames racked out of square, and posts that have lifted or leaned as the clay moved under them. On a long alley-access lot in The Avenues, a wood gate that drags every August is telling you the soil, not the hinge, is the problem. We diagnose the cause, then either re-set or sleeve the post, true the frame, or replace hardware, depending on what the gate actually needs. For a closer look at that side of the work, see Gate Repair in Chico.

Gate Repair in Chico

Electric Gate Repair in Chico

Electric gate repair in Chico goes well past the motor. We diagnose automated openers, control boards, photo-eye safety edges, loop and keypad access control, and the wiring that ties them together – the layer most general handymen won’t touch. If your Elite or Ghost Controls operator opens halfway and reverses, or the keypad stopped responding, we track it to the actual component rather than quoting a full replacement. Summer heat and dust are hard on exterior control enclosures here, so we check the housing and connections along with the electronics. Details live on Electric Gate Repair in Chico.

Electric Gate Repair in Chico
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 369-2364

Gate Installation in Chico

Gate Installation in Chico

Gate installation in Chico has to start with the soil and the era of the property, not the catalog. In the post-2000 subdivisions of north and east Chico, the original builder-grade vinyl and aluminum gates are now sagging and mis-latching after 15 to 20 years on shallow-set posts, and a straight replacement is often the cleanest fix. In The Avenues and South Campus, a new gate has to fit a tight, older lot where the fence line, the alley, and the garage all crowd the same few feet. Both come down to the same thing: posts set to proper footing depth in ground that moves. We handle the full range of Gate Installation, from a single side-yard swing gate to a commercial slide system.

Driveway Gate Installation

Signs you need it

Your current driveway gate is out of square, the posts have shifted enough that no hinge adjustment holds, or you’re adding a gate where the driveway never had one.

What it costs in Chico

Driveway gate installation in Chico typically runs $2,500 to $8,500 for the gate, posts, and hardware, depending on width, material, and whether an operator is included.

How we do it

We measure the opening and check the soil and grade, set posts to proper footing depth, hang the gate, and confirm it swings clear across the full seasonal range before we call it done.

Sliding Gate Installation

Signs you need it

You need to cover a wide driveway without the swing arc a double gate requires, or an existing slide gate has come off the track one too many times.

What it costs in Chico

Sliding gate installation in Chico typically falls between $3,000 and $9,500, including the track, posts, and gate panel, with commercial-grade systems at the upper end.

How we do it

We set and level the track on a proper footing, align the gate and rollers, and – if it’s automated – wire the operator and safety edges so the gate stops and reverses correctly.

What Gate Installation Costs in Chico

Item Typical range in Chico
Driveway gate installation $2,500 – $8,500
Sliding gate installation $3,000 – $9,500
Automatic gate operator added to a new gate $1,200 – $4,500

All figures are typical estimates for the Chico market, and the written estimate sets the final price before any work begins. Wider openings, heavier materials, longer power runs, and commercial-grade operators push the number up.

Can you install an automatic gate on a tight Chico lot?

Yes. Tight lots in The Avenues and South Campus usually call for a sliding gate, since it needs no swing arc, or a swing gate with a carefully placed operator. We measure the clearance before recommending anything.

Do you handle the power run and the safety edges?

We do. New automated gates in Chico get wired with proper power and photo-eye safety edges so the gate stops and reverses for people, pets, and vehicles. Call (866) 369-2364 for a free estimate.

Brands We Service in Chico

We work on the brand that’s actually on your operator: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, from DIY residential units to heavy-duty commercial systems. We’re independent, so a failing control board doesn’t automatically mean a new system. See our brands for the full list, and expect a diagnosis based on your gate rather than a stock answer.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Chico, CA

Typical Chico ranges by job, all set by a written estimate before work starts:

Service Typical range in Chico
Gate repair (hinges, latches, alignment) $150 – $450
Gate post re-set or sleeve $300 – $900
Gate frame repair or re-square $250 – $750
Gate hardware replacement $120 – $400
Electric gate repair (operator or control) $200 – $700
Control board replacement $350 – $850
Safety edge / photo-eye repair $150 – $450
Driveway gate installation $2,500 – $8,500
Sliding gate installation $3,000 – $9,500
Automatic gate operator added to a new gate $1,200 – $4,500

In Chico, price climbs with post work – re-setting or sleeving a post in that expansive clay takes more labor than a hinge swap – and with commercial-grade operators and longer power runs. We quote the job and agree on the number before anyone starts, so the invoice matches the estimate.

Neighborhoods We Serve in Chico

We install and repair gates across Chico, from the tight older lots to the newer subdivisions. If your gate is in one of these areas, you’re in our normal service range.

  • The Avenues
  • Downtown Chico
  • South Campus
  • North Chico
  • East Chico

We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, so most Chico calls get a same-day or next-opening visit.

Service Area – Cities Near Chico

Beyond Chico itself, we cover the surrounding communities – the small towns and rural properties where post movement and older gate hardware are just as common. If you’re outside Chico city limits, reach out and we’ll confirm coverage. You’ll find dedicated pages for Durham, CA, Paradise, CA, Magalia, CA, and Orland, CA, each written to the same standard as this Chico page.

Serving Chico, CA – Our Local Coverage Area

We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Chico

Ready to get started? Free estimates · same-day response in Chico
Call (866) 369-2364

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Chico Customers Say

★★★★★ 4.8 from 8+ reviews

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

- Maria Delgado

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

- Todd Hoffman

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Carlos Mendoza

How It Works in Chico

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Chico - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Chico. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7