Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orland, CA
Orland gates work harder than most. Long driveway entrances, orchard access lanes and side-yard openings on older in-town lots all take a beating from hot valley summers, dusty gravel drives and winter tule fog. As a gate-only company, we diagnose and repair swing and slide gates, fix the electric operators and access control that drive them, and install new gates built for how this town actually uses them. Our technicians have up to 9 years of experience and work on nine brands, from a Mighty Mule on a rural drive to a DoorKing on a commercial lot. Call (866) 369-2364 for a free estimate.
Why Orland Homes Are Different
Orland sits where the northern Sacramento Valley turns agricultural, and that shapes nearly every gate call here. In town you find older single-family homes, many mid-century or earlier, with detached garages and narrow side-yard gates that have been opened and closed for decades. Outside the city limits, the parcels get bigger: rural residential lots and orchard properties with long driveways, pipe-rail and chain-link farm gates, and custom wood entrance gates that frame the road.
The climate pushes back on all of it. Summers bring intense afternoon sun that dries and warps wood until boards cup and gates drag. Winter tule fog and rain keep posts damp long enough to rot right at the ground line, so what looks like a sagging hinge is often a buried post giving way. Irrigation overspray and dust off gravel farm drives wear hinges, latches and rollers faster than most homeowners expect. We check the post before we blame the gate, because in Orland that is usually where the problem started.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Orland Services
Most calls we get from Orland come down to two things: a gate that has stopped working, or an electric operator that has failed on it.
Gate Repair in Orland
Mechanical gate repair here means tracking down why a gate has gone crooked, stiff or stuck. On older in-town properties that often starts with a wood or metal side-yard gate that has swollen from winter dampness and now scrapes the ground. Out on the rural parcels, it’s usually pipe-rail or chain-link that has shifted after tractor traffic or a post rotting at the soil line. We check hinges, latches, rollers, tracks, frames and the buried post before recommending anything. Learn more about Gate Repair in Orland.

Electric Gate Repair in Orland
Electric gate repair covers the operator, the control board, the safety edges, the access control and the power run feeding it all. When a sliding driveway operator stops mid-cycle or a swing gate reverses for no reason, the answer is usually in the electronics, not the panels. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems, so we can diagnose the brand on your operator instead of guessing at it. Our technicians have up to 9 years of experience with automated gates. See Electric Gate Repair in Orland.

Gate Installation in Orland

Gate installation in Orland has to answer to the land it sits on. Long orchard and rural driveway entrances call for wider openings, heavier panels and operators sized for daily tractor or truck traffic, while in-town lots on older homes usually need a side-yard or driveway gate that clears a tight swing without hitting a fence or a garage corner. Hot summers warp wood and rust steel hardware, and winter fog rots posts at the ground line, so footing depth and material choice matter more here than the catalog photo suggests. That’s what we plan for before anyone sets a post. Our Gate Installation work covers the full job, from measuring the opening to commissioning the operator.
Driveway Gate Installation
Signs you need it
Your driveway entrance is wider than a standard gate, or the old gate has warped, rusted or shifted enough that patching it no longer holds.
What it costs in Orland
A typical driveway gate installation in Orland runs roughly $1,800 to $6,500, with automated systems toward the top of that range once the operator, safety edges and access control are included.
How we do it
We measure the opening and check grade, set posts to proper footing depth, hang and align the gate, then wire and test the operator and safety edges before handing over the controls.
Sliding Gate Installation
Signs you need it
Your entrance has room to slide rather than swing, or you need a wider clear opening than a swing gate can give on a long rural drive.
What it costs in Orland
Sliding gate installation usually falls between $2,200 and $7,500 depending on panel width, track length and whether an operator and access control are part of the job.
How we do it
We lay out the track line, pour and set the footing, mount the track and gate, install the operator and rollers, then run the power and set the travel limits and safety sensors.
What Gate Installation Costs in Orland
| Item | Typical range in Orland |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Sliding gate installation | $2,200 – $7,500 |
| Automatic operator and access control add-on | $900 – $3,200 |
Do I need a permit to install a gate in Orland?
Most gate installations that involve posts, electrical work or a driveway approach need a permit, so check with the City of Orland’s building department before work starts. We can tell you what the job involves so you know what to ask.
How long does a new gate installation take in Orland?
A simple manual gate can go in over a day or two, while an automated sliding gate with a power run and access control usually takes longer and is scheduled after the measure. We confirm the timeline in the written estimate.
Brands We Service in Orland
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems, from DIY-grade residential operators to heavy-duty commercial units. Being brand-agnostic means we diagnose the actual fault instead of steering you toward a replacement your system doesn’t need. Take a look at our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orland, CA
| Service | Typical range in Orland |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Sliding gate installation | $2,200 – $7,500 |
| Automatic operator and access control add-on | $900 – $3,200 |
| Manual swing gate repair | $150 – $600 |
| Gate post reset or replacement | $300 – $1,200 |
| Hinge, latch and roller replacement | $120 – $450 |
| Electric gate operator diagnosis and repair | $250 – $900 |
| Control board replacement | $400 – $1,100 |
| Safety edge and sensor replacement | $200 – $700 |
| Access control and keypad work | $250 – $1,000 |
In Orland, price climbs with the size of the opening, the material you choose, and how much has to be rebuilt below grade once we dig into a rotted post. Every job is quoted per the written estimate, and the price is agreed before any work starts.
Neighborhoods We Serve in Orland
We cover Orland and the rural parcels around it, from the older in-town blocks with narrow side-yard gates out to the orchard and rural residential drives beyond the city limits in 95963. Tractor traffic, irrigation overspray and gravel road dust are part of the conversation on most of these calls, because they wear gate hardware faster than anything else here. Response across the Orland area is usually same-day for repair calls booked during dispatch hours.
- Downtown Orland and surrounding in-town blocks
- Rural residential parcels off the main valley roads
- Orchard properties with long driveway entrances
- Outlying acreage with pipe-rail and farm-access gates
Service Area – Cities Near Orland
Orland sits at a crossroads, and we travel the roads around it regularly. If you’re just up the highway, we also cover Corning, CA to the north. South and east of here we work in Chico, CA, Durham, CA and Paradise, CA. Wherever you are on that loop, we treat the gate the same way: check the post and the operator before recommending a replacement. Call (866) 369-2364 and we’ll confirm your address is in range.
Serving Orland, CA – Our Local Coverage Area
We serve Orland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orland
We answer 24/7, and fast dispatch runs 7am to 7pm Sunday through Friday, so most Orland repair calls get a same-day visit when booked in that window. We’re closed Saturday. A call outside dispatch hours is booked into the next opening.
You’ll want to check with the City of Orland on permits, since gate posts and electrical work often need one, and confirm HOA rules if you’re in a neighborhood with them. We’ll tell you what the job involves so you know what to ask.
Yes. We work on orchard properties and rural residential driveways throughout the Orland area, not just in-town lots. Long entrances, pipe-rail gates and farm-access gates are a regular part of what we service. Call (866) 369-2364 for a free estimate and we’ll confirm coverage.
Whether you need a new gate set or a stubborn operator diagnosed, our gate-only focus means you’re talking to people who work on gates every day. Call (866) 369-2364 for a free estimate in Orland. We answer 24/7, with fast dispatch from 7am to 7pm Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Orland Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Maria Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Todd Hoffman"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Carlos Mendoza