Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Chico
If your gate won’t latch, drags on the ground, or the opener has gone silent, we repair gates across Chico and know exactly why they fail here. Clay soil moves posts, dry summers warp older wood, and legacy operators quit on boards you can’t buy anymore. Our technicians have up to 9 years of experience working on residential and light-commercial gates, from worn hinges to failed control boards. Call (866) 369-2364 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Chico Homeowners Call Gate Repair Chico for Gate Repair
We’re a gate-only shop. Our gate repair team works on gates because that’s the whole job, not a sideline to fences or garage doors or general handyman work. That focus shows up in a diagnosis: we check the post footing and plumb before we touch a hinge, because in Chico the post is usually the real problem.
Chico’s housing stock shapes the work. The Avenues, downtown, and South Campus hold turn-of-the-century and mid-century bungalows with wood privacy gates and alley-access gates on long narrow lots, plus wrought-iron and chain-link gates from the 1950s through the 70s that are rusting and out of square. North and east Chico’s post-2000 subdivisions have builder-grade vinyl and aluminum gates on shallow-set posts that are already sagging and mis-latching.
When you call, we ask what brand is on the operator and what the gate is doing. Mighty Mule, Ghost Controls, DoorKing, Elite, and the rest all fail in their own ways, and knowing that saves a trip and a wrong guess. We serve Chico directly and keep estimates clear and upfront, with the price quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Chico
Gate Welding in Chico usually means saving a steel or wrought-iron gate that rust or movement has cracked or racked, not replacing it. The city’s older neighborhoods are full of these gates, and a welded repair at a cracked hinge mount or a bowed frame can add years to a gate that would otherwise come down. A typical weld repair in Chico runs $150 – $400 depending on access and how much metal needs cutting out and rebuilding. After welding, we treat the repaired area so the rust doesn’t just return next rainy season.
Rust and structural cracks
Salt air isn’t the issue here; it’s decades of wet winters and bone-dry summers on older iron. We cut out compromised sections and weld in steel that matches, then treat and protect the repair. A cracked hinge plate on a 1960s chain-link frame is a common one.
Weld repairs on vinyl and aluminum gates
Builder-grade aluminum and vinyl gates in the newer subdivisions don’t weld the same way, so we look at the frame joints and fasteners first. Sometimes the fix is refastening and realigning rather than welding. We’ll tell you which before any work starts.
Commercial Gate Repair in Chico
Commercial Gate Repair in Chico covers the sliding and swing gates on small commercial lots, storage yards, and multi-unit properties, and it needs someone who knows DoorKing and the other access-control hardware by name. A stuck gate on a commercial lot blocks traffic and creates a liability, so diagnosis comes fast: we check the operator, the control board, the safety edges, and the loop detector before we decide what to fix or replace. A typical commercial repair in Chico runs $250 – $800 depending on the operator and the parts. The written estimate sets the final price.
Access control and operators
DoorKing and similar systems tie a gate to keypads, remotes, and entry codes. When the gate stops responding, the fault is often in the board or a wiring connection rather than the gate itself. We trace it back to the source instead of guessing at parts.
Heavy slide and swing gates
Commercial gates carry more weight and more cycles, so worn rollers, tracks, and hinges show up sooner. We check the gate’s travel and alignment under load, not just at rest, so the repair holds up to daily use.
Trusted Brands We Service in Chico
We work on the brands you actually have on your gate: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether it’s a Mighty Mule on a driveway or a DoorKing on a commercial lot, we know the operator, the parts that fail, and the boards that are no longer made. That knowledge is why we can often repair a system a less specialized shop would tell you to replace. We don’t claim to stock parts, but we know where to source them for a fast turnaround. Bring us the brand and the symptom, and we’ll get to the diagnosis.
Common Gate Repair Problems We See in Chico Homes
- Clay-soil post heave on shallow-set builder posts. Chico’s expansive clay subsides in summer and swells in winter, so a gate that swings in March drags by August. The panel usually fails at the hinge post, not the middle, so we check footing and plumb first.
- Summer dry-shrink and warp on older wood gates. The Avenues and South Campus have wood gates hung on decades-old hardware; the dry heat splits and warps panels and racks frames out of square, so the usual fix is sag correction at the post plus new hardware.
- Rusted, out-of-square wrought-iron and chain-link gates. Gates from the 1950s through the 70s have been through a lot of wet winters and dry summers, and the rust and racking show at the hinges and frame joints. A weld repair often saves them.
- Obsolete control boards and worn legacy operators. Older operators on pre-modern-safety gates leave entrapment protection missing or non-functional, and the boards are often discontinued. We verify the safety photocell and loop detector on every operator we touch.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Chico, CA
Here’s what gate repair typically runs in Chico. A hinge or latch adjustment is $95 – $200. A post re-set or sleeve runs $250 – $650 depending on depth and soil. Weld repair is $150 – $400. Electric gate repair, including control board or operator work, is $200 – $700. A commercial repair is $250 – $800. The estimate is free, and the price is quoted and agreed before any work starts, so there are no surprises on the invoice. What moves the number is whether the problem is the post, the panel, or the operator; a sag that looks like a hinge issue is often a footing issue. Call (866) 369-2364 for an exact quote. Estimates are free.
We Also Serve Cities Near Chico
We also cover the towns around Chico: Durham, Paradise, Magalia, and Orland. The same clay-soil movement and legacy-operator problems show up across the valley, and we bring the same gate-only diagnosis to each. If your property sits outside the city and you’re not sure we reach it, give us a call and we’ll tell you straight.
Serving Chico, CA – Our Local Coverage Area
We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Chico
Because the clay soil under the post swells in the wet season and shrinks in the dry months, moving the post and changing the gate’s hang. That seasonal movement is why we re-set or sleeve the hinge post instead of just tweaking hinges. Call (866) 369-2364 for a free estimate.
Often it can be retrofitted, if the gate frame and operator are sound and a compatible board or control module is available. When the operator is worn past saving and the gate lacks modern safety parts, replacement is the cheaper answer over time. We’ll give you both numbers and let you decide.
Yes, if a gate operator was installed before modern entrapment protection, adding photocells and checking the loop detector is a real safety need. A gate that closes without sensing an obstruction can crush or trap. We verify safety components on every operator we service.
Sometimes, but a latch that misses after rain usually means the post has moved, not that the latch is loose. Adjusting the latch alone will fix it until the next dry spell. We check the post first so the fix lasts.
Yes. Wood gates hung in the wet season are deliberately left a little loose because the dry heat shrinks and tightens them. If we set it tight in winter, it would bind by August. Call (866) 369-2364 and we’ll talk through the right hang for your gate.
Get Your Gate Fixed in Chico
If your gate is dragging, missing the latch, or the opener has quit, call us and we’ll diagnose it properly and quote the price before any work starts. Call (866) 369-2364 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Chico.