Gate Repair in Chico, CA | Gate Repair Chico

Gate Repair in Chico - Fixed Today, No Surprise Invoice

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer 24/7

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Repair Across Chico

If your gate won’t latch, drags on the ground, or the opener has gone silent, we repair gates across Chico and know exactly why they fail here. Clay soil moves posts, dry summers warp older wood, and legacy operators quit on boards you can’t buy anymore. Our technicians have up to 9 years of experience working on residential and light-commercial gates, from worn hinges to failed control boards. Call (866) 369-2364 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (866) 369-2364

Why Chico Homeowners Call Gate Repair Chico for Gate Repair

We’re a gate-only shop. Our gate repair team works on gates because that’s the whole job, not a sideline to fences or garage doors or general handyman work. That focus shows up in a diagnosis: we check the post footing and plumb before we touch a hinge, because in Chico the post is usually the real problem.

Chico’s housing stock shapes the work. The Avenues, downtown, and South Campus hold turn-of-the-century and mid-century bungalows with wood privacy gates and alley-access gates on long narrow lots, plus wrought-iron and chain-link gates from the 1950s through the 70s that are rusting and out of square. North and east Chico’s post-2000 subdivisions have builder-grade vinyl and aluminum gates on shallow-set posts that are already sagging and mis-latching.

When you call, we ask what brand is on the operator and what the gate is doing. Mighty Mule, Ghost Controls, DoorKing, Elite, and the rest all fail in their own ways, and knowing that saves a trip and a wrong guess. We serve Chico directly and keep estimates clear and upfront, with the price quoted and agreed before any work starts.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Gate Welding in Chico

Gate Welding in Chico usually means saving a steel or wrought-iron gate that rust or movement has cracked or racked, not replacing it. The city’s older neighborhoods are full of these gates, and a welded repair at a cracked hinge mount or a bowed frame can add years to a gate that would otherwise come down. A typical weld repair in Chico runs $150 – $400 depending on access and how much metal needs cutting out and rebuilding. After welding, we treat the repaired area so the rust doesn’t just return next rainy season.

Rust and structural cracks

Salt air isn’t the issue here; it’s decades of wet winters and bone-dry summers on older iron. We cut out compromised sections and weld in steel that matches, then treat and protect the repair. A cracked hinge plate on a 1960s chain-link frame is a common one.

Weld repairs on vinyl and aluminum gates

Builder-grade aluminum and vinyl gates in the newer subdivisions don’t weld the same way, so we look at the frame joints and fasteners first. Sometimes the fix is refastening and realigning rather than welding. We’ll tell you which before any work starts.

Commercial Gate Repair in Chico

Commercial Gate Repair in Chico covers the sliding and swing gates on small commercial lots, storage yards, and multi-unit properties, and it needs someone who knows DoorKing and the other access-control hardware by name. A stuck gate on a commercial lot blocks traffic and creates a liability, so diagnosis comes fast: we check the operator, the control board, the safety edges, and the loop detector before we decide what to fix or replace. A typical commercial repair in Chico runs $250 – $800 depending on the operator and the parts. The written estimate sets the final price.

Access control and operators

DoorKing and similar systems tie a gate to keypads, remotes, and entry codes. When the gate stops responding, the fault is often in the board or a wiring connection rather than the gate itself. We trace it back to the source instead of guessing at parts.

Heavy slide and swing gates

Commercial gates carry more weight and more cycles, so worn rollers, tracks, and hinges show up sooner. We check the gate’s travel and alignment under load, not just at rest, so the repair holds up to daily use.

Trusted Brands We Service in Chico

We work on the brands you actually have on your gate: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whether it’s a Mighty Mule on a driveway or a DoorKing on a commercial lot, we know the operator, the parts that fail, and the boards that are no longer made. That knowledge is why we can often repair a system a less specialized shop would tell you to replace. We don’t claim to stock parts, but we know where to source them for a fast turnaround. Bring us the brand and the symptom, and we’ll get to the diagnosis.

Common Gate Repair Problems We See in Chico Homes

  • Clay-soil post heave on shallow-set builder posts. Chico’s expansive clay subsides in summer and swells in winter, so a gate that swings in March drags by August. The panel usually fails at the hinge post, not the middle, so we check footing and plumb first.
  • Summer dry-shrink and warp on older wood gates. The Avenues and South Campus have wood gates hung on decades-old hardware; the dry heat splits and warps panels and racks frames out of square, so the usual fix is sag correction at the post plus new hardware.
  • Rusted, out-of-square wrought-iron and chain-link gates. Gates from the 1950s through the 70s have been through a lot of wet winters and dry summers, and the rust and racking show at the hinges and frame joints. A weld repair often saves them.
  • Obsolete control boards and worn legacy operators. Older operators on pre-modern-safety gates leave entrapment protection missing or non-functional, and the boards are often discontinued. We verify the safety photocell and loop detector on every operator we touch.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Repair in Chico, CA

Here’s what gate repair typically runs in Chico. A hinge or latch adjustment is $95 – $200. A post re-set or sleeve runs $250 – $650 depending on depth and soil. Weld repair is $150 – $400. Electric gate repair, including control board or operator work, is $200 – $700. A commercial repair is $250 – $800. The estimate is free, and the price is quoted and agreed before any work starts, so there are no surprises on the invoice. What moves the number is whether the problem is the post, the panel, or the operator; a sag that looks like a hinge issue is often a footing issue. Call (866) 369-2364 for an exact quote. Estimates are free.

We Also Serve Cities Near Chico

We also cover the towns around Chico: Durham, Paradise, Magalia, and Orland. The same clay-soil movement and legacy-operator problems show up across the valley, and we bring the same gate-only diagnosis to each. If your property sits outside the city and you’re not sure we reach it, give us a call and we’ll tell you straight.

Serving Chico, CA – Our Local Coverage Area

We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Repair in Chico

Get Your Gate Fixed in Chico

If your gate is dragging, missing the latch, or the opener has quit, call us and we’ll diagnose it properly and quote the price before any work starts. Call (866) 369-2364 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Gate Repair Chico.

Why Chico Chooses Gate Repair Chico

We set the standard for gate repair in Chico.

30-60 Min Response

Fast dispatch across Chico, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Chico

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Chico - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically the same day.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Chico Customers Say

Trusted by homeowners across Chico and surrounding areas.

★★★★★

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

Maria Delgado
★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Todd Hoffman
★★★★★

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

Carlos Mendoza

Ready for Gate Repair in Chico?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Chico.

(866) 369-2364

Request a Free Estimate in Chico

Tell us about your gate repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7